Hyundai Dashboard Symbols and Meanings (FULL List, FREE Download)

This indicator light illuminates when there is a malfunction in operation in any of the following systems:
● Exterior lamp malfunction
● Blind-Spot Collision Warning (BCW) malfunction (if equipped)
● Lane Keeping Assist (LKA) System malfunction (if equipped)
● Tire Pressure Monitoring System (TPMS)
● Service reminder
To identify the details of the warning, look at the LCD display

This warning light illuminates:
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the emission control system. In this case, have your vehicle inspected by an authorized HYUNDAI dealer.

This warning light illuminates when the washer fluid level in the reservoir is nearly empty. If the washer fluid warning light illuminates, refill the washer fluid reservoir in the engine room when possible.

This warning light illuminates:
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When one or more of your tires are significantly underinflated (The location of each underinflated tire is displayed on the supervision cluster LCD display).
This warning light remains ON after blinking for approximately 60 seconds or repeatedly blinks ON and OFF in 3-second intervals: When there is a malfunction with the TPMS. In this case, have your vehicle inspected by an authorized HYUNDAI dealer.

This indicator light illuminates when the vehicle detects the immobilizer in the key with the ignition switch in the ON position. At this time, you can start the engine. The indicator light goes off after starting the engine.
This indicator light blinks when there is a malfunction with the immobilizer system. In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

This warning light illuminates:
● When you set the ignition switch or the Engine Start/Stop button to the ON position.
● When there is a malfunction with the LED headlight. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
This warning light blinks when there is a malfunction with a LED headlight-related part. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

This indicator light illuminates:
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the ESC system. In this case, have your vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks while the ESC is operating.

This warning light illuminates:
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the ABS (The normal braking system will still be operational without the assistance of the anti-lock brake system). In this case, have your vehicle inspected by an authorized HYUNDAI dealer.

This warning light illuminates:
● Once you turn the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with the EPS. In this case, have your vehicle inspected by an authorized HYUNDAI dealer.

This warning light illuminates:
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● Whenever there is a malfunction with the AWD system. If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer.

This indicator light illuminates for up to 30 seconds when the vehicle detects the smart key in the vehicle with the Engine Start/Stop button in the ACC or ON position. At this time, you can start the engine. The indicator light goes off after starting the engine.
This indicator light blinks for a few seconds when the smart key is not in the vehicle. At this time, you cannot start the engine.
This indicator light illuminates for 2 seconds and goes off: If the smart key is in the vehicle and the Engine Start/Stop button is ON, but the vehicle cannot detect the smart key. In this case, have your vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks when there is a malfunction with the immobilizer system. In this case, have your vehicle inspected by an authorized HYUNDAI dealer.

This indicator light illuminates:
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When you activate the system by pressing the DBC button.
This indicator light blinks when the DBC is operating.
This indicator light illuminates yellow when there is a malfunction with the DBC system. If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer.

This indicator light illuminates:
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When you deactivate the ESC system by pressing the ESC OFF button.

This indicator light illuminates when there is a malfunction with the lane-keeping assist system. If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer.

This warning light illuminates:
● When you place the Engine Start/Stop button to the ON position. The EPB warning light illuminates for approximately 3 seconds and then turns off.
● Whenever there is a malfunction with the EPB. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

This warning light illuminates when the fuel tank is nearly empty. Add fuel as soon as possible.

This indicator light illuminates:
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When you select AWD Lock mode by pressing the AWD LOCK button. The AWD LOCK mode is to transfer a portion of the drive torque to the rear wheels for increased traction on wet pavement, snow-covered roads, or when driving off-road.

This warning light illuminates :
● Once you set the ignition switch or the Engine Start/Stop button to the ON position. It illuminates for approximately 3 seconds and then goes off.
● When there is a malfunction with FCA. In this case, have your vehicle inspected by an authorized dealer of HYUNDAI.

This warning light illuminates if one of the exterior bulbs (headlamp, DRL, turn signal lamp, stop lamp, etc.) is not operating properly. One of the bulbs may need to be replaced. If the vehicle is equipped with LED headlamps, have the vehicle inspected by an authorized HYUNDAI dealer.

This warning light is to warn the driver the road may be icy. When the temperature on the outside temperature gauge is approximately below 40°F (4°C), the Icy Road Warning Light and Outside Temperature Gauge blink and then illuminate. Also, the warning chime sounds 1 time.
You can activate or deactivate Icy Road Warning function from the User Settings mode in the cluster LCD display (if equipped with supervision cluster).

This indicator light illuminates when you select “SPORT” mode as drive mode.

This indicator light illuminates when there is a malfunction with the auto hold system. In this case, have the vehicle inspected by an authorized HYUNDAI dealer.