Are you stuck trying to figure out the difference between the ANCEL BM500, ANCEL Bm700, and the AUTOPHIX 7810? We’re here to help.
ANCEL BM500, BM700, and AUTOPHIX 7810 are excellent scan tools replete with useful features for performing detailed for BMW/MINI/Rolls Royce car checks. Such devices save you the stress and cost of checking in at the mechanic too often. However, making an informed choice between these three devices can pose a challenge for car enthusiasts and mechanics alike.
To help you make an informed decision, we’ve tested these three devices on various for BMW/MINI/Rolls Royce vehicles to create this guide. By the end of this guide, you’ll know whether the ANCEL BM500, ANCEL BM700, or AUTOPHIX 7810 is right for you.
Table of Contents
ANCEL BM500 vs. BM700 vs. AUTOPHIX 7810: Comparison Chart
|Weight||12.6 ounces||1.3 pounds||9.6 ounces|
|Dimensions||9.13 x 6.38 x 1.54 inches||6.1 x 4 x 1.2 inches||3.5 x 1.2 x 6.5 inches|
|Vehicle Compatibility||OBD2 Ford cars, SUVs, F-150, F-250|
|OBD2 Ford cars, SUVs, F-150, F-250|
|OBD2 Ford cars, SUVs, F-150, F-250
|Software /Adapter compatibility||windows 7/8/10||windows 7/8/10||windows 7/8/10|
|System diagnosis||Full system||Full system||Full system|
|Special functions||Battery registration;|
Oil reset; CBS reset;
|Vehicle Supported||OBD2 BMWs||OBD2 BMWs||OBD2 BMWs|
About ANCEL BM500 vs. BM700 vs. AUTOPHIX 7810
The ANCEL BM500 is an OBII diagnostic scan tool for BMW Group vehicles. It’s a relatively cheap device that you can use to perform a complete diagnostic check of your BMW car anywhere. The tool performs diagnostics on the car Engine, ABS, Airbag, and PCM Adaptations. It also allows you to carry out Oil Reset, CBS Reset, and BMW MINI Battery Registration. The scanner also conducts EPB, ETC, and BMS tests.
This car scanner gives you real-time results and allows you to keep an eye on your vehicle as you drive. The Anti-lock Brake System (ABS) function is one of the most important feature of the ANCEL BM500. It’s especially essential if you wish to maintain proper control of your car during braking. The code reader can also help you maintain the SRS system, which is important for driver and passenger safety. Before you get typical and regular transmission errors, this device can help you stay ahead of the curve.
Even though this device doesn’t have a calibration function for steering angle sensors, it allows BMW users read and clear error codes for the steering. In addition, problems with monitoring your four-wheel drive become a thing of the past as it helps you ensure your wheels are balanced. You can also erase the error code you get from the electronic due pump control module with these devices. This feature is especially important if you still get errors after fixing the fuel pumps.
This OBDII scanner is an upgraded version of the BM500. It works perfectly well for anyone with a BMW Group vehicle (BMW, Rolls-Royce, and MINI) or any car sold in the United States after 1996. It can detect and erase errors on multiple systems, including the brake and steering functions. The ANCEL BM700 also comes with a wide variety of advanced functions like battery registration and fuel pump reset. Besides, it can read VIN data for BMW cars and help you stay informed with important updates through constant bug fixes.
With this relatively new device, you can rest your steering angle seamlessly with the aid of an accurate sensor. It also comes with sensors for throttle position adjustment. This is a more advanced tool, so whether you’re a mechanic or a DIYer, we recommend reading the user manual thoroughly before using it.
The AUTOPHIX 7810 is a professional diagnostic tool for BMW Mini and Rolls Royce vehicle systems. However, it’s also handy for detecting engine system problems in some vehicle brands made between 1998 and 2001 and all brands after 2001.
The AUTOPHIX 7810 scanner performs the following functions your BMW vehicle: CBS Reset/CBS correct, clear adaptations, battery management, EPB Electronic Parking brake, Steering-angel sensor, and Learning valvetronic limit positions. Its OBDII functions include Read fault codes, Clear fault codes, Retrieve data stream, EVAP test, vehicle information, and I/M Readiness.
With this device, you can examine your transmission system and the gear set, especially if they are electronic. It also has safety features to monitor your airbag and electronic brake system. You can also evaluate the chassis and engine system and reset the throttle value position seamlessly.
The AUTOPHIX 7810 doesn’t need an upgrade before use, but if you want to update it, you can start by plugging it into a computer through a USB cable. After this, log on to the manufacturer’s official website and download the update tool.
Detailed comparison and review of Ancel BM500 vs. BM700 vs. AUTOPHIX 7810
Ancel BM500, BM700, and AUTOPHIX7810: Things in Common
1. Maximum vehicle coverage
All three devices work with vehicles with OBD II protocols. In addition, the two ANCEL brands work for all cars sold in the United States after 1996.
Both ANCEL products are similar in appearance, and although the AUTOPHIX 7810 has a different design, all three devices have the same aspect ratio. They all look compact and weigh about a pound each. The buttons are similar across board, but the AUTOPHIX has a different button placement
All three devices are quite on the low side in terms of price. They can help you perform a full diagnostic check of your vehicle before heading for the mechanic. They can also help you make minor repairs before spending lavishly at a repair shop. With any of these, you will save a ton of cash for car maintenance.
All three devices come with a year warranty. However, most outlets run a thirty days money-back policy for faulty devices.
Ancel BM500, BM700, and AUTOPHIX 7810: Key differences explained
1. Specialties for BMW
Both ANCEL brands focus primarily on OBD2 testing. They are excellent tools for reading and erasing error codes, seeing real-time information, and performing an emission check. All three products can also test battery issues as well as register them. The AUTOPHIX device offers something similar for BMW cars and vehicles from other makers. It is a rugged device that can help you retrieve VIN data and test EVAP systems.
However, these devices are designed with specialties for BMW Group vehicles. For the BM500, these special features include: Battery Management, Reset Maintenance Interval Indicator, Powertrain Control Module (PCM) Adaptations, Electronic Throttle Control (ETC) Reset, Four System Diagnostics, PCM Clear Adaptation, and EPB (Electric Parking Brake) Reset.
The ANCEL BM700 also has special functions that allows for all-system diagnosis of BMW Group vehicles. These functions include: Condition Based Service (CBS) Reset/Correct, Electrical Park Brake (EPB) Reset, Steering Angle Sensor (SAS) Learning, Diesel Particulate Filter (DPF) Regeneration, Electronic Gearbox System (EGS) Clear Adaption, Throttle Position Sensor (TPS) Adjustment, Battery Registration, Fuel Pump Reset (F chassis only), Injector Coding (IQA), and Idle Speed Adjustment.
The AUTOPHIX performs several special functions designed for BMWs, including CBS Reset/CBS correct, clear adaptations, battery management, EPB Electronic Parking brake, Steering-angel sensor, and Learning valvetronic limit positions.
2. Supported vehicle models
The BM700 and BM500 support a wide range of vehicles, especially those sold after 1996 in the United States. Furthermore, these brands also both support other models aside from BMW and vehicles with OBD2 protocols including BMW and Rolls Royce. The BM700 can also support non-electric 12V vehicles and light trucks as long as they have a 16 PIN OBD2 port.
The ANCEL BM500 supports the following BMW vehicle models:
- BMW 1 Series:E81/E82/E87/E88,F20/F21/F52
- BMW 2 Series:F22/F23/F45/F46/F87
- BMW 3 Series:E30/E36/E90/E91/E92/E93,F30/F31/F34/F35/F80,G20
- BMW 4 Series:F32/F33/F36/F82/F83
- BMW 5 Series:E28/E34/E39/E60/E61,F07/F10/F11/F18/F90,G30/G31/G38
- BMW 6 Series:E24/E63/E64/F06/F12/F13,G32
- BMW 7 Series: E23/E32(19861994)/E38/E65/E66/E67/E68,F01/F02/F03/F04,G11/G12
- BMW 8 Series:E31,G14/G15/G16
- BMW X Series: X1E84/F48/F49,X2F39,X3E83/F25/G01,X4F26/G02,X5E53/E70/F15/F85/G05, X6E71/E72/F16/F86,X7G07
- BMW Z Series:Z1E30,Z3E36,Z4E85/E86/E8,Z8E52
- BMW I Series:I3I01,I8I12
The BM700 supports the following BMW Group vehicle models:
- BMW 1 Series: E81/E82/E87/E88/F20/F21/F52
- BMW 2 Series: F22/F23/F45/F46/F87
- BMW 3 Series: E30/E36/E46/E90/E91/E92/E93/F30/F31/F34/F35/F80/G20
- BMW 4 Series: F32/F33/F36/F82/F83
- BMW 5 Series: E28/E34/E39/E60/E61/F07/F10/F11/F18/F90/G30/G31/G38
- BMW 6 Series: E24/E63/E64/F06/F12/F13/G32
- BMW 7 Series: E23/E32/E38/E65/E66/E67/E68/F01/F02/F03/F04/G11/G12
- BMW 8 Series: E31/G14/G15/G16
- BMW X Series: X1 E84 F48 F49/ X2 F39/ X3 E83 F25 G01/ X4 F26 G02/ X5 E53 E70 F15 F85 G05/ X6 E71 E72 F16 F86/ X7 G07
- BMW Z Series: Z1 E30/ Z3 E36/ Z4 E85 E86/ Z4 E89/ Z8 E52
- BMW I Series: I3 I01/ I8 I12
- BMW MINI: R50/R52/R53/R55/R56/R57/R58/R59/R60/R61/F54/F55/F56/F60
- Rolls-Royce Series: RR1/RR2/RR3/RR4/RR5
AUTOPHIX 7810 supports the following BMW models:
- 1 Series: E81/E82/E87/E88 and F20/F21/F52 (2017-present)
- 2 Series: F22/F23/F45/F46/ F87 (2015-present);
- 3 Series: E30 (1982-1994)/ E36 / E46/ E90/ E91/E92/E93/ F30/F31/F34/F35/ F80 / G20 (2018-present);
- 4 Series: F32/F33/F36/F82/F83;
- 5 Series:E28 (1981-1988) / E34 (1988-1996)/E39/E60/E61/F07/F10/F11/F18/F90 (2017-present)/G30/G31 (2017-present) and G38 (2017-present) ;
- 6 Series: E24 (1976-1989)/E63/E64/F06/F12/F13/G32 (2017-present) ;
- 7Series:E23 (1977-1987)/E32 (1986-1994)/E38/E65/E66/E67/E68/F01/F02/F03/F04/G11/G12 (2015-present)
- 8 Series: E31 (1990-1999)/G14/G15/G16 (2018-present);
- X Series: X1 E84 /F48 /F49 (2011-2017) / X2 F39 (2018-present) / X3 E83 / F25 / G01 (2018-present) / X4 F26 /G02 (2018-present) / X5 E53 / E70, F15 / F85 /G05 (2018-present) /X6 E71 /E72 / F16 / F86 /X7 /G07 (2018-present)
- Z Series:Z1 E30 (1990-1999)/ Z3/E36/Z4/E85/E86/Z4/E8/Z8/E52
- I: I3/I01/I8/I12
- MINI: MINI_R50/R52/R53,
- MINI_R55/R56/ F60 (2017-present)
3. Supported protocols
The ANCEL brands both support all OBD2 protocols and CAN networks. The AUTOPHIX7810 also supports OBD2 protocols, but for vehicles sold between 1998 and 2001, if they are BMW.
4. Design and display
The difference in design between the three products is quite subtle. The BM700 has a noticeable large screen like the AUTOPHIX7810. The large screen makes them easier to read compared to the BM500. However, the BM500 has a comfortable and simpler interface as a result of the hotkeys.
The BM700 is the most expensive of the trio, followed closely by its ANCEL counterpart. Furthermore, the BM700 also weighs an impressive 1.3 pounds, while the BM500 weighs 12.6 ounces. The AUTOPHIX7810 weighs less than the two at 9.6 ounces.
The AUTOPHIX7810 has a one-year warranty, just like the ANCEL brands. However, most stores run a 30 days money-back policy in case of substandard products.
7. User manual download
You can download the user manual from their respective manufacturer’s website. The BM700 device particularly requires a good understanding of the manual as it is an advanced diagnostic tool.
Which should I go for?
The ANCEL BM500 is great for both DIY and casual BMW enthusiast who want the basic functions of a car scanner. Even though its features are basic, they are enough of them for it to be worth its relatively cheap price.
If you are a professional auto repair person or an adept car lover, the robust functional capabilities of the BM700 make it a good choice in this regard. Top auto outlets that work on various BMW vehicles will benefit greatly from this device.
The AUTOPHIX 7810 is the device to purchase if you wish to consider a cheap alternative as a mechanic. It wouldn’t do much good to a DIY enthusiast like the ANCEL BM500. However, its easy-to-use interface calls for a tie in this regard.
Comparing these three products, you’ll notice that the ANCEL brand edges the Autophix slightly when it comes to quality and consumer rating. All three devices can also work well for both hobbyists and professionals. However, while the ANCEL brand is excellent for its OBD II compatibility and impressive adaptation, the less expensive Autophix and its up-to-date features could be a better device for casual use. In essence, if you own any BMW car, you can get reliable and accurate diagnostics from any of these devices.
Which of these devices support brake bleeding?
The ANCEL BM500 and BM700 devices can help you bleed the brakes automatically.
Will the BM 700 work on a 03 Dodge 1500?
No. The device works only for BMW cars. However, it can selectively work for other OBD II-compliant vehicles. For instance, its engine fault code erasure and VIN data retrieval still work for these vehicles.
How do I know which features of these devices work for my car?
There are certain factors you must consider in this scenario. However, it all involves reaching out to the makers. You will need to submit your vehicle model, production date, and device model. As soon as you do that, they’ll let you know which features you can get.
Will these devices work on bikes?
Not really. The reason is that most motorcycles don’t come with an OBD connector which you need to use the device. However, if you purchase the proper adapter, you can run some basic diagnostic tests.
Will these devices work on cars sold outside the US?
There is no reason why it shouldn’t. However, you can get in touch with the makers if you have a compatibility issue.