Nissan P1137: Swirl Control Valve Control Position Sensor Circuit Malfunction
Is your scanner showing Nissan P1137?
No worries. We'll show you what it means and how to deal with it.
Nissan P1137: Swirl Control Valve Control Position Sensor Circuit Malfunction
OVERVIEWWhat Does The Nissan P1137 Code Mean?
Engine started, engine running at idle speed, and the PCM detected an unexpected “high” or “low” signal on the SCV Control Position sensor circuit during the CCM test.
Note: The SWL/C POSI SE PID on the Scan Tool should read close to 0 deg.
What Are The Potential Causes Of The Nissan P1137 Code?
- Swirl Control valve control position sensor open or shorted
- Swirl Control valve control position sensor is damaged
- Swirl Control valve control position sensor has failed
- PCM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Twippo 372Pcs Waterproof Wire Connectors Kit
>>> Y#16 01-04 Nissan Pathfinder Vacuum Switch Swirl Control Valve SPDB28-111 OEM
>>> Nissan Engine Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Nissan P1137, DTCDECODE.
