Jeep U1106: CAN C Mute - Signal Missing
Is your scanner showing Jeep U1106?
No worries. We'll show you what it means and how to deal with it.
Jeep U1106: CAN C Mute - Signal Missing
OVERVIEWWhat Does The Jeep U1106 Code Mean?
This diagnostic checks the status of the CAN communication between TCM and its connected CAN nodes. When the TCM CAN network is not in “BUS OFF” status but TCM does not receive acknowledgement flags from the other nodes after its CAN transmissions, a “CAN MUTE” failure is detected.
What Are The Potential Causes Of The Jeep U1106 Code?
- (D65) can c bus (+)circuit shorted to ground
- (d64) can c bus (-)circuit shorted to ground
- (d65) can c bus (+)circuit shorted to voltage
- (d64) can c bus (-)circuit shorted to voltage
- (d65) can c bus (+)circuit shorted to (d64) can c bus (-) circuit
- Antilock brake module
- Powertrain control module (PCM)
- Transmission control module (TCM)
- All wheel drive control(AWD) module
- Steering angle sensor(SAS)
- Totally integrated power module (TIPM)
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Twippo 372Pcs Waterproof Wire Connectors Kit
>>> Jeep ABS Control Module
>>> Transfer Case Control Module
>>> Dorman Remanufactured Totally Integrated Power Module for Select Jeep Models
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Jeep U1106, DTCDECODE.
