Jeep P1140: Vacuum Reservoir Solenoid Open Or Short-To-Ground
Is your scanner showing Jeep P1140?
No worries. We'll show you what it means and how to deal with it.
Jeep P1140: Vacuum Reservoir Solenoid Open Or Short-To-Ground
OVERVIEWWhat Does The Jeep P1140 Code Mean?
Ignition on; Vacuum Reservoir Solenoid commanded OFF. If the ECM does not detect a voltage signal or a change in voltage on the control circuit, this DTC will set.
What Are The Potential Causes Of The Jeep P1140 Code?
- Intermittent condition
- ASD Relay output circuit is open
- Vacuum Reservoir Solenoid control circuit is open or is shorted to ground
- Vacuum Reservoir Solenoid has failed
- ECM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Twippo 372Pcs Waterproof Wire Connectors Kit
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Jeep P1140, DTCDECODE.
