Dodge B1B8E: Driver Seat Track Position Sensor Circuit High

Is your scanner showing Dodge B1B8E?
No worries. We'll show you what it means and how to deal with it.

Presented by
Randy Worner

Dodge B1B8E: Driver Seat Track Position Sensor Circuit High

OVERVIEW
Severity
:
Medium
DIY Difficulty Level
:
Intermediate
Repair Cost
:
$80-$150
Can I Still Drive?
:
Yes (Short-term only)

What Does The Dodge B1B8E Code Mean?

While the CAN bus ignition status is in IGN_RUN and the module is configured for a Seat Track Position Sensor, the module checks the sensor input current ranges. If the module detects that the sensor input is greater than or equal to 20.5 mA. This DTC may set when the current is between 17 mA and 20.5 mA.

What Are The Potential Causes Of The Dodge B1B8E Code?

  • Driver seat harness improperly routed
  • Driver seat harness wires chafed, pierced, pinched, partially broken
  • Driver seat harness connector terminals broken, bent, pushed out, spread, corroded, contaminated
  • (R261) driver seat position sensor data circuit shorted to voltage
  • (R263) driver seat position sensor voltage circuit shorted to voltage
  • (R261) driver seat position sensor data circuit shorted to (R263) driver seat position sensor voltage circuit
  • Driver seat track position sensor
  • Occupant restraint controller (ORC)

Recommended Parts

Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:

>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Occupant Restraint Module Dodge
>>> Seat Position Sensor - Mopar (56054036AB)

Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!

Reference Sources

Dodge B1B8E, DTCDECODE.

Tagged :
You know someone would like this

Leave a comment

Your email address will not be published. Required fields are marked *