Dodge B1028: Rear Blower Control Request Input Circuit Low
Is your scanner showing Dodge B1028?
No worries. We'll show you what it means and how to deal with it.
Dodge B1028: Rear Blower Control Request Input Circuit Low
OVERVIEWWhat Does The Dodge B1028 Code Mean?
The Rear A/C Heater Control works in conjunction with the A/C Heater Control to control the rear blower motor, rear temperature control and rear mode control. The Rear A/C Heater Control is constantly monitored by the A/C Heater Control for proper operation. If the monitored signal circuits are out of a calibrated range a DTC will set.
What Are The Potential Causes Of The Dodge B1028 Code?
- Rear A/C heater control disconnected
- Rear blower signal circuit shorted to ground
- Rear blower signal circuit open
- 5-volt supply circuit shorted to ground
- 5-volt supply circuit open
- Rear A/C heater control
- A/C heater control
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> A/C And Heater Control - Mopar (55111871AE)
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Dodge B1028, DTCDECODE.