Chrysler B103F: Rear Mode Door Travel Range Too Large
Is your scanner showing Chrysler B103F?
No worries. We'll show you what it means and how to deal with it.
Chrysler B103F: Rear Mode Door Travel Range Too Large
OVERVIEWWhat Does The Chrysler B103F Code Mean?
The rear mode and temperature blend doors are controlled by a two wire actuator. The door actuator motor will rotate either clockwise or counter clockwise by reversing the polarity of the circuits depending on the command from the controller. The A/C Heater Control monitors the circuits for proper operation and will set a Diagnostic Trouble Code (DTC) if a fault is detected.
What Are The Potential Causes Of The Chrysler B103F Code?
- Related DTCS Present
- Rear Mode Door Stops
- Rear Mode Door
- Rear Mode Door Actuator
- A/C Heater Control
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Dorman 604-029 HVAC Blend Door Actuator
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Chrysler B103F, DTCDECODE.
