BMW P1022: Valvetronic (VVT), Eccentric Shaft Sensor 2 Circuit Low Input
Is your scanner showing BMW P1022?
No worries. We'll show you what it means and how to deal with it.
BMW P1022: Valvetronic (VVT), Eccentric Shaft Sensor 2 Circuit Low Input
OVERVIEWWhat Does The BMW P1022 Code Mean?
With the engine running, the fault is a low voltage supply to the sensor after 3ms. The DME, VVT are active at 4.5 to 5.5 volts
What Are The Potential Causes Of The BMW P1022 Code?
- Short to ground in wiring harness
- VVT-SG defective
- Short circuit within the sensor
- Check plug and wiring harness for sensor defect
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> Eccentric Shaft Sensor for Valvetronic System for BMW
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
BMW P1022, DTCDECODE.
