BMW P1014: Valvetronic (VVT) Reference Sensor Parity Error (Bank 1)
Is your scanner showing BMW P1014?
No worries. We'll show you what it means and how to deal with it.
BMW P1014: Valvetronic (VVT) Reference Sensor Parity Error (Bank 1)
OVERVIEWWhat Does The BMW P1014 Code Mean?
This code indicates that after 12ms and the DME and VVT are active, it is detected that the sensor is not properly communicating. The plug is defective on the sensor or there is an open circuit.
What Are The Potential Causes Of The BMW P1014 Code?
Below are some potential causes of this DTC:
- Plug contact problem at Pin 6 on sensor
- Oil in plug at sensor
- Replace sensor
- Repair gaskets
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> Eccentric Shaft Sensor for Valvetronic System for BMW
>>> BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
BMW P1014, DTCDECODE.
