Acura P1758: A/T Lockup Solenoid Valve 'B' Circuit Malfunction
Is your scanner showing Acura P1758?
No worries. We'll show you what it means and how to deal with it.
Acura P1758: A/T Lockup Solenoid Valve 'B' Circuit Malfunction
OVERVIEWWhat Does The Acura P1758 Code Mean?
Vehicle driven in 1st, 2nd, 3rd and 4th gears, and the PCM detected an unexpected voltage condition on the Solenoid ‘B’ circuit during the CCM test.
Note: The D4 lamp on the dash will flash twice when this code is set.
What Are The Potential Causes Of The Acura P1758 Code?
- Lockup solenoid ‘A’ control circuit is open or shorted to ground
- Lockup solenoid ‘A’ circuit is shorted to system power
- Lockup solenoid ‘A’ connector is disconnected or damaged
- Lockup solenoid ‘A’ is damaged or has failed
- TCM or PCM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> Twippo 372Pcs Waterproof Wire Connectors Kit
>>> Acura Engine Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Acura P1758, DTCDECODE.
