Acura P1381: Camshaft Position Sensor 1 No Signal
Is your scanner showing Acura P1381?
No worries. We'll show you what it means and how to deal with it.
Acura P1381: Camshaft Position Sensor 1 No Signal
OVERVIEWWhat Does The Acura P1381 Code Mean?
Engine cranking or running; and the PCM did not detect any signals from the Camshaft Position (CMP) sensor 1 during the CCM test.
Note: The engine will start and run without the CMP sensor 1 signal.
What Are The Potential Causes Of The Acura P1381 Code?
- CMP signal circuit is open or shorted to ground
- CMP pickup assembly or CMP sensor is damaged or has failed
- PCM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> Acura Camshaft Position Sensor
>>> Acura Engine Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Acura P1381, DTCDECODE.
