Acura P1279: VTEC System Malfunction (Bank 2)
Is your scanner showing Acura P1279?
No worries. We'll show you what it means and how to deal with it.
Acura P1279: VTEC System Malfunction (Bank 2)
OVERVIEWWhat Does The Acura P1279 Code Mean?
Engine running in closed loop, then accelerated in 1st gear to over 6000 rpm for 2 seconds, and the PCM detected a fault in the VTEC rear solenoid or the VTEC rear pressure switch during the CCM test.
What Are The Potential Causes Of The Acura P1279 Code?
- VTEC rear solenoid control circuit is open or shorted to ground
- VTEC rear solenoid is damaged or has failed
- VTEC rear pressure switch circuit is open or shorted to ground
- VTEC rear pressure switch is damaged or has failed
- PCM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> XtremeAmazing VTEC Oil Pressure Switch Solenoid
>>> VTEC Solenoid Spool Valve
>>> Acura Engine Control Module
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Acura P1279, DTCDECODE.
