Acura B2160: Driver's MPCS Unit Lost Communication with Gauge Control Module (VSP/NE Message)

Is your scanner showing Acura B2160?
No worries. We'll show you what it means and how to deal with it.

Presented by

Randy Worner

00:00/00:00

OVERVIEW

Severity

Medium

DIY Difficulty Level

Intermediate

Repair Cost

$75-$200

Can I Still Drive?

Yes (Short-term only)

What Does The Acura B2160 Code Mean?

This code indicates poor communication between the driver’s MPCS unit and the Gauge Control Module.

Below are some potential causes of this DTC:

Loose or poor connections between the driver’s MPCS unit and the Gauge Control Module
Blown fuse in the main under-hood fuse box
Blown fuse in the under-dash fuse/relay box
“Open” or “Short” Condition between the driver’s MPCS unit and the Gauge Control Module
Faulty Gauge Control Module
Faulty Driver’s MPCS Unit

Check possible solutions below:

If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.
If DTCs B1011, B1060, B1061, B1205, B1206, B1207, B1359, B1906, B1956, B2157, and/or B2160 are also indicated, perform the Gauge Control Module input test.
If no codes are present, perform the driver’s MPCS unit input test.