B1352 Ford Code: Ignition Troubles Unveiled And Resolved

You’re out and about in your Ford, enjoying the ride, when suddenly, the Check Engine Light springs to life on your dashboard. That’s when you reach for your trusty OBD scanner, revealing the culprit: the B1352 Ford code.

Don’t worry, though – in this article, we’ll decode this secret language and help you understand what the B1352 code is all about. Whether you’re a curious driver or a DIY enthusiast, get ready to unravel the mystery behind your car’s messages and learn how to tackle the B1352 code.

B1352 Ford: A Quick Overview

Below is a summary of the B1352 Ford Code. Check it out!

  • Definition: Ignition Key-In Circuit Failure
  • Severity: Low
  • DIY Skill Level: Intermediate
  • Continue To Drive?: Yes
  • Estimated Repair Cost: $20 – $250

What Does The B1352 Code Mean On Ford?

When you see fault code B1352, it means the car’s control module (BCM) noticed a problem with the ignition key circuit. This happens when you put in the key, and one of the critical wires isn’t working as it should. You might like to know, this often affects the wires that provide power to the door chimes through the ignition switch.

B1352 Ford
B1352 mostly appears on Ford and Jaguar models.
(Credit: Powerstroke.org)

Please note that the B1352 fault code is specific to certain manufacturers, appearing exclusively in Ford and Jaguar vehicles. This code doesn’t apply to all types of cars, so it’s limited to these particular brands.

Additionally, it’s essential to be aware of similar fault codes that might be recorded and could assist in identifying the issue. Codes such as B2961 and B2965 are among the codes to look for. These codes can provide further insights into the problem at hand.

How Severe Is The B1352 Ford Code? 

B1352 fault code is typically a minor issue. Sometimes, the vehicle runs fine with the code, but it might also lead to a no-start condition. If the engine doesn’t crank, fixing the code quickly is best to get the vehicle running. Otherwise, addressing the problem whenever possible is a good idea to prevent potential complications.

What Are The Signs Of The B1352 Code On Ford Vehicles?

The symptoms of the B1352 Ford code may include the following:

Read more: P1131 Ford: Symptoms, Causes, and How to Fix

What Causes The B1352 Ford Code? 

The B1352 Ford code can be caused by the following:

  • Defective door chime component
  • Wiring or connection issues
  • Malfunctioning ignition switch
  • Bad PCM or BCM (rarely)

How To Diagnose And Fix The B1352 Ford Code

When faced with the B1352 Ford code, addressing the issue promptly is crucial for maintaining the functionality of your vehicle’s ignition system and security features. The following parts will show you essential stuff for your fixing process as well as a step-by-step guide to address the problem.

Essential Tools And Parts

Step-by-step Procedure

Step 1: Inspect the door chime component 

Check for any signs of damage or malfunction in the door chime system. If necessary, replace the faulty component to ensure proper functionality.

Step 2: Check wiring and connections

Carefully inspect the wiring and connections related to the ignition key circuit, including those associated with the door-open switches and the ignition switch. Repair or replace any damaged wires or connectors.

Step 3: Examine the ignition switch

Inspect the ignition switch for any signs of wear, damage, or irregular operation. If the switch is problematic, consider replacing it to restore proper functionality.

This is a video about how to fix the B1352 Ford by Fintech Repair Shop.

Step 4: Diagnose the PCM and BCM

The PCM and BCM are integral to the vehicle’s operation and security systems. If other solutions do not resolve the issue, a comprehensive diagnostic scan of these modules may be necessary. Seek professional help to diagnose and address any potential problems with these modules.

Step 5: Clear the trouble codes

After identifying and resolving the underlying issues, it’s essential to clear the B1352 trouble code from the vehicle’s memory. This can typically be done using a diagnostic tool or by disconnecting the vehicle’s battery for a short period. Clearing the code ensures that the issue has been successfully addressed.

Read more: Complete List Of Ford OBD2 Codes for FREE Download

Estimated Costs For B1352 Code In Ford Vehicles

The cost of replacement parts for addressing the B1352 Ford code can vary based on factors such as the specific vehicle model, brand, and parts availability. If you are not confident in fixing the problem yourself, just find a skilled Ford mechanic to do it for you flawlessly.

Here’s a rough estimate of the cost for the components that might be involved in fixing the issue:

Repair TaskEstimated Cost Range
Door chime component replacement$20 to $50
Ignition switch assembly replacement$50 – $150
Key replacement$50 – $250
PCM or BCM replacement/repair$200- $1000

B1352 Ford Infographic

B1352 Ford
Check this infographic for the summarized information about this B1352 code on Ford vehicles.

Final Thoughts

In the world of modern vehicle diagnostics, understanding and addressing specific trouble codes like the B1352 Ford code is crucial. By recognizing its significance and potential causes, you’re better equipped to navigate the path toward effective solutions. 

If this article has been helpful, consider sharing it with fellow car enthusiasts. Feel free to leave your comments below, sharing your experiences or questions related to the B1352 code. Safe driving and smooth troubleshooting!

References Sources

TroubleCodes.net, B1352 OBD Trouble Code.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *