Foxwell is known for providing easy solutions at affordable prices to car owners worldwide. The pick between Foxwell GT60 vs. GT60 Plus boils down to your own personal needs.
The GT60 and GT60 Plus are not short of professional features that can work on more than 80 vehicle brands. In this article, I will take a look at their similarities and differences.
Their pros and cons will help you decide which one is for you. There is also a FAQs section that will help answer a few of your queries.
Table of Contents
Foxwell GT60 vs. GT60 Plus: Complete comparison table
FOXWELL GT60 Plus
|System diagnostics||All systems||All systems|
|Service functions||Supports 24 reset and service functions.||Supports 24 reset and service functions.|
|Coding/programming||Injector coding, key programming.||Injector coding, key programming (for specific vehicles), control module programming.|
|Specialties||Free online updates for 18 months.||Comes with OBD1 and OBD2 adapters.|
|Supported Vehicles||OBD2 cars, SUVs, 12V trucks||OBD1/OBD2 cars, SUVs, 12V trucks|
*Notes: Excellent: 9-10; Good: 7-8; Fair: 5-6; Poor: 3-4; Very poor: 1-2
Foxwell GT60 vs. GT60 Plus: The similarities
Full OBD2 functions
The Foxwell GT60 and GT60 Plus have full support of the OBD2 functions. These scanners come with 10 OBD2 functions, which sets them apart from the basic scanners that only have a few. Manufacturers are not obligated to include all OBD2 functions, which is great to see that Foxwell didn’t omit any.
The full OBD2 support may not be necessary to users who need to perform essential functions like reading emissions-related codes. However, full OBD2 functions support is critical for technicians and other vehicle professionals who need to perform several tests on multiple vehicles.
If you want full OBD2 functions but don’t bother with the more advanced features the GT60 Plus offers, then the GT60 is for you.
Full system diagnostics
Foxwell GT60 Plus and GT60 support all the system diagnostics in your vehicle. These system diagnostics are non-OBD, which makes them unrelated to the emissions regulations. Regular scan tools that cost less than $100 will typically have 4-system diagnostic support for the engine, airbag, ABS, and transmission systems.
The full system diagnostics include additional systems support for areas like the alarm system, TPMS system, steering system, wheel system, fuel system, etc. The additional system support is important since a fault can cause a lit Check Engine Light (CEL) in several systems that regular scanners cannot detect.
If you have ever cleared a fault code with a simple OBD2 scan tool only to have the Check Engine Light (CEL) stay on, then these scan tools are for you. Full system diagnostic scan tools help you capture more potential problems and thereby help you turn off the CEL for good.
|FOXWELL GT60||FOXWELL GT60 Plus|
|It supports all of the communication protocols, including: ISO9141-2, ISO14230-2, ISO15765-4, K/L lines, Double K lines, Double K Line, SAE-J1850 VPW, SAE-J1850PWM, CAN ISO 11898, High-speed, Middle-speed, Low-speed and Single-wire CAN, KW81, KW82, GM UART, UART Echo Byte Protocol, TP2.0, TP16, SAE J1939, SAE J1708, and Fault-Tolerant CAN.||It supports all of the communication protocols, including: ISO9141-2, ISO14230-2, ISO15765-4, K/L lines, Double K lines, Double K Line, SAE-J1850 VPW, SAE-J1850PWM, CAN ISO 11898, High-speed, Middle-speed, Low-speed and Single-wire CAN, KW81, KW82, GM UART, UART Echo Byte Protocol, TP2.0, TP16, SAE J1939, SAE J1708, and Fault-Tolerant CAN.|
OBD2 compliant vehicles support a number of communication protocols which include: SAE J1850 PWM, SAE J1850 VPW, ISO014230 (KWP2000), ISO9141-2, and ISO15765-4/SAE J2480. The protocols have variants that are sometimes counted as independent protocols.
Different vehicle manufacturers support different protocols. The GT60 and GT60 Plus support all the various protocols. This means that the two scanners can be used in any OBD2 compliant vehicle (so long as the model is under the scanner’s vehicle coverage list).
Foxwell GT60 vs. Gt60 Plus: The differences
Advanced service functions
Foxwell GT60 has 28 advanced service functions, which are not so different from the 30+ advanced service functions of the GT60 Plus. Even though GT60 Plus has more reset and service functions, they both cover a wide range of service capabilities. The GT60 service functions include:
- Oil light reset
- DPF regeneration
- AFS (headlamp) reset
- EGR adaption
- Brake-pad reset
- IMMO service
- Windows calibration
- Coolant bleeding
- Steering angle reset
- Injector coding
- Seat calibration
- Transport mode
- Battery matching
- Airbag rest
- Tyre reset
- ODO reset
- ABS bleeding
- Gear learning
- Language change
- Adblue reset
- Electronic throttle adaption
- Suspension matching
- A/F reset
- Nox sensor reset
- TPMS reset
- A/T learning
- Sunroof initialization
- Stop/start reset.
The extra advanced service and reset functions in the GT60 Plus lacking in GT60 include battery configuration, TPS reset, prime fuel pump, clutch adaptation and control module coding/programming. If you want more features for flexibility then the GT60 Plus is the choice for you.
Foxwell GT60 and GT60 Plus come with support for injector coding and key programming. The GT60 Plus can also perform control module programming, which is impossible with the GT60. Needless to say, GT60 Plus is the scanner to go with if you want control module programming.
If you want bi-directional control to perform active tests then the GT60 Plus is the scanner for you. The bi-directional tests of GT60 Plus include ABS manual control tests, ABS motor test, ABS version test, actuator tests, auto bleed test, service bleed, automated test, function reset, gear tension relief test, idle up manual control test, and many more.
Bi-directional control is important since it facilitates interactive operations that test car components like engine fans, door controls, wipers, and windows.
GT60 Plus has 13 OBD1 adapters and one OBD2 adapter that come in the purchase package. The 13 OBD1 adapters include a Mazda 17 Pin adapter, Mercedes Benz 38 Pin Adapter, Toyota 22 Pin Adapter, BMW 20 Pin Adapter, Nissan 14 Pin Adapter, Mitsubishi 12+16 Pin Adapter, Toyota 17 Pin Adapter, Fiat 3 Pin Adapter, PSA 2 Pin Adapter, Kia 20 Pin Adapter, Audi 4 Pin Adapter, GM/Daewoo 12 Pin Adapter, and Honda 3 Pin Adapter.
The GT60 only comes with a diagnostic cable and OBD2 adapter. The GT60 will get free online updates for 18 months. After 18 months the cost of updating is $200 for one year, $350 for two years, and $450 for three years. The GT60 Plus on the other hand gets free online updates for 12 months. After 12 months the cost of updating is $250 for one year, $450 for two years, and $600 for three years.
GT60 Plus is the choice for a mechanic who wants a variety of OBD1 adapters that can work in a wide range of vehicles. Choose GT60 if you want an extra 6 months of free software updates and cheap software prices after the free period.
|FOXWELL GT60||FOXWELL GT60 Plus|
|It supports over 80 vehicle brands which include Chrysler, Ford, GM, GM Brazil, Acura, Daewoo, Daihatsu, Honda, Hyundai, Hyundai CV, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, Ssang Yong, Subaru, Suzuki, Toyota, SAMSUNG, MARUTI, Mahindra, Tata, Abarth, Alf-Romeo, Audi, Aston Martin, Bentley, BMW, Bugatti, Citroen, Dacia, EU Ford, Ferrari, Jaguar, Lancia, Land Rover, Lamborghini, Maserati, Maybach, Mercedes, Benz, Mlini, Opel, Peugeot, Renault, Roll-Royce, Porsche, Saab, Sat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW, VW_CV, Baicmotor, Bjhyundai, Brilbmw, Brilliance, Byd, Changan, Chery, Chery_NE, Cmc, Dfhonda, DYK, Emgrand, Englon, Fordchina, Geely, Gleagle, Gqfiat, Greatwall, Gzhonda, Haima, Jac, Karry, Landwind, Lifan, Luxgen, Maple, Mazdachina, Rely, Riich, Roewe, Sicamous, Samsung, Sgmw,SH-Skoda, SH-VW, Toyota China, YQ-Audi, and YQ-VW.||It supports over 100 car brands which include Chrysler, Ford, GM, Acura, Daewoo, Daihatsu, Honda, Hyundai, Hyundai CV, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, Ssang Yong, Subaru, Suzuki, Toyota, Abarth, Alfa-Romeo, Audi, Aston Martin, Bentley, BMW, Bugatti, Citroen, Dacia, EU Ford, Fiat, Ferrari, Jaguar, Lancia, Land Rover, Lamborghini, Maserati, Maybach, Mercedes Benz, Mini, Opel, Peugeot, Renault, Rolls-Royce, Porsche, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW, VW_CV, BJ Hyundai, BRIL BMW, DF Honda, Dyk, Ford China, GQ Fiat, GZ Honda, Mazda China, Saic Skoda, Saco VW, Toyota China, FAW Audi, and FAW VW.|
Both scan tools support a great number of vehicles. GT60 supports over 80 vehicle brands, and GT60 Plus 100 brands. The number of supported brands is added regularly to widen the coverage, so make sure to check with the manufacturer.
GT60 Plus can be used in both OBD1 and OBD2 vehicles from 1996-2019 in America, 2003-2009 in Asia, and 2001-2019 in Europe. GT60 is capable of working on OBD1 and OBD2 compliant vehicles from the same era and regions.
Pros and cons
- Has over 24 advanced service functions.
- Can be used for OBD2 and OBD1 vehicles, including a few recent 2020/2021 models.
- Supports more than 80 vehicle models.
- Does not support bi-directional control (active test).
- The 12-month free update is short since other scan tools of the same caliber (e.g., Foxwell NT716) provide lifetime free updates.
Foxwell GT60 Plus
- Supports bi-directional control.
- Supports OBD2 and OBD1 vehicles from 1995/1996 models to a few of the latest 2020 models.
- The purchase package comes with 13 OBD1 adapters.
- Supports over 100 vehicle brands.
- Is very expensive when compared to GT60.
- Does not provide lifetime free updates.
The GT60 has more than 24 services and reset functions that can save any car owner thousands of dollars at the repair shop. The scan tool is physically identical to its superior brother, the GT60 Plus, and only lacks programming features and bi-directional control.
If you want more programming features, OBD1 adapters, and bi-directional control, then the GT60 Plus is your pick. However, if these features are unnecessary to you and you want to save some cash, you will be pleased with the GT60.
Can the Foxwell GT60 perform Auto VIN detection on various cars?
The GT60 can perform auto VIN on various vehicles so long as the VIN information of the car is programmed into the vehicle’s ECU. Several modules may not keep the VIN information, requiring you to go through the car manually.
How do I register the Foxwell GT60 and GT60 plus scan tools?
Ensure the scanner has a good network connection and is fully charged/connected to a power supply before registration (or updating). Here are the steps to follow:
- Click on update from the Main Menu and select the ‘Free Registration’ Button.
- Add the needed information and select the ‘Free Registration’ Button to finish.
- Select the ‘OK button, and the scan tool will recognize the serial number.
- Proceed to click ‘Submit,’ and this will activate the Foxwell GT60 scan tool.
Which scan tool can I use to relearn a crankshaft and camshaft sensor?
The Foxwell GT60 does not support the ability to relearn the camshaft sensor or the crankshaft sensor. GT60 Plus Premier Diagnostic tool, on the other hand, can perform this function. You may also opt for the Foxwell NT510 Elite, which can also do the job but is cheaper than the GT60 Plus.
Is the Foxwell GT60 Plus able to connect to my vehicle with Bluetooth?
Foxwell GT60 Plus comes with several communication interfaces, some of which can connect to your vehicle. The communication interfaces include built-in Wi-Fi 802.11 b/g Wireless LAN, USB 2.0 Host standard, micro-USB 2.0 OTG, and Bluetooth 4.0. You can connect the scanner to your vehicle via Wi-Fi, Bluetooth, or a wired connection with the diagnostic cable.
Which vehicles can use the injector coding service function in GT60 Plus?
The Injector coding support list for Foxwell GT60 Plus include BMW, Chrysler, Audi, Acura, Citroen, Ford, GM, Honda, Infiniti, Hyundai, Fiat, Jaguar, Lancia, Mini, Mercedes-Benz, Land Rover, Mitsubishi, Subaru, Toyota, Volvo, Volkswagen, Skoda, Smart, Sprinter, Peugeot, Opel, Nissan, Renault, Scion, and Romeo.