P0441 – Evaporative Emission System Incorrect Purge Flow

The P0441 code is a relatively minor code related to the evaporative emission control system. It’s not especially common, either, showing up more often on Chryslers than on other makes of vehicle.

Aside from lighting up the maintenance indicator on your dash, the P0441 code won’t have much effect on your system. Learn more about what causes the P0441 code and how to fix it below.

P0441 Code Definition

P0441 Code Definition: Evaporative emission control system incorrect purge flow

Here's where you can get a thorough understanding of the P0441 OBD2 code
If you want to learn about the P0441 OBD2 code, this is the right place

What Does P0441 Mean?

The P0441 OBD2 trouble code relates to your evaporative emission control (EVAP) system. It’s a relatively rare trouble code for most car makers. When it comes up, it often appears alongside other codes related to the EVAP system, including P0440, P0442P0449, P0452, P0453, P0455, and P0456.

The EVAP system prevents harmful, smog-forming compounds from escaping in your emissions. Fuel vapors run through a charcoal canister, where pellets absorb the pollutants. The cleaned emissions are then sent through the purge valve back into the intake manifold to become part of the air/fuel mix.

If this code triggers, it means your ECU detected the purge flow isn’t happening correctly. There may be either too few or too many vapors running from the charcoal canister back into the engine. 

There is a vacuum switch on the purge valve that sends data about the airflow to the ECU. P0441 often triggers when this switch stays closed when the system should be purging, but it isn’t the only potential cause of this trouble code, though, as you’ll see below. 

What Are The Symptoms Of The P0441 Code?

Possibly, you won’t notice any changes in how your car drives. If you do, it’s likely to be mild. The main symptoms of a P0441 code are:

What Are The Causes Of P0441?

  • Faulty purge valve or solenoid
  • Faulty vacuum switch
  • The gas cap is loose or damaged
  • EVAP hoses are leaking, loose, or damaged
  • Clogged lines around the EVAP system
  • The charcoal canister is cracked, damaged, or clogged
  • Short in the wiring harness
  • Faulty PCM
  • Faulty leak detection pump (Chrysler specific)

How Serious Is The P0441 Code?

The trouble code P0441 doesn’t indicate a danger to your vehicle. As mentioned above, you probably won’t notice any change except the check engine light activation. You do want to clear and fix the code before your next inspection, but it is otherwise not a cause for concern.

How To Diagnose The P0441 Code

Tools You’ll Need:


  1. Read your freeze frame data to find out when and under what conditions the code triggered. Also, check the fuel pressure data to check for leaks in the fuel tank.
  2. Inspect your gas cap and the seal to make sure it’s secured tightly. If there are cracks or damage, replace the gas cap.
  3. Check the vacuum hoses around the EVAP system to ensure they’re connected. Run your fingers along them and inspect them visually for cracks or leaks. 
  4. Visually inspect the charcoal canister for clogs and cracks. If it’s damaged, it will need to be replaced. If it’s clogged, you may be able to clean it.
  5. Use a vacuum pump to test the purge valve. You can do this by disconnecting the vent valve and attaching the vacuum pump gauge in its place. Pump to 17 psi. The valve should hold the vacuum. If the needle on the gauge moves, the valve is faulty and needs replacing.
  6. Apply voltage to the purge valve. There should be a click when it opens, and you’ll notice the pressure gauge dropping. If you don’t, replace the purge valve.

Common Mistakes To Avoid While Diagnosing The P0441 Code

A loose or damaged gas cap is the most common cause of trouble code P0441. Some people will simply replace the gas cap without checking for other causes. Even if the P0441 code clears initially after replacing the gas cap, scan your car again after driving it for a few days. Running a complete diagnosis lets you be sure you’ve found the root of the problem.

What Should You Do To Fix The Code P0441?

After each step of your repair, clear all trouble codes and recheck your car. This will help you assess if you’ve found the root of the issue before making any unnecessary repairs.

  1. If you drive a Chrysler, replace the leak detection pump. It is the most likely cause of the P0441 trouble code on those vehicles.
  2. Replace any damaged hoses you found during your inspection.
  3. Remove the charcoal canister. Inspect the lines and passages leading to it for carbon deposits and blockages. You can clean them away using throttle body cleaner. 
  4. Clean the charcoal canister with compressed air. To do this, set the canister on a flat surface, then blow compressed air at about 50 psi of pressure through the purge vent opening. Take care to close the other openings on the canister with your fingers when you do this. Allow the air to pass through for a couple of minutes, then reinstall the canister.
  5. Get a new gas cap, even if you don’t notice any damage to your existing one. Unseen damage to the cap could be triggering the P0441 code.
  6. Replace the purge valve if it fails either step 5 or 6 of the diagnosis above.
  7. Conduct a smoke test of your engine to verify there are no microscopic leaks in your hoses, valves, and other systems.

If the code still hasn’t cleared, you may have a more severe issue with your PCM or electronics system. Take your car to a mechanic for further diagnosis.

How to fix the P0441 code

Tips To Avoid P0441 In The Future

Always make sure your gas cap is securely replaced after every fill-up. You can also prevent your EVAP system from being damaged by applying an anti-rust treatment on your engine, which will minimize corrosion and prevent many issues with leaks and damaged hoses.

Read More:

P1101 Chevy Cruze – Intake Air Flow System Performance

P0441 Code: Meaning, Symptoms, Causes, Diagnostics, and Fixes