Are you spending a fortune on solving basic engine and driveability issues? If so, then you need an affordable OBD2/EOBD code reader. ATDIAG AT330 Car code reader is designed to read and clear diagnostic trouble codes.
Table of Contents
ATDIAG AT330 Overview
This code reader can help you to verify repairs, emission status, and road tests. Besides, ATDIAG AT330 reader is built with the average car owners in mind.
It has four hotkeys for ease of navigation and clearing codes. Better yet, it has a colored screen that allows you to easily read and clear codes.
To find out more about ATDIAG AT330, read this comprehensive review that heights features, strengths, and weaknesses.
Detailed Review of ATDIAG AT330
Features and Functionalities
1. Retrieve the I/M readiness status
Being able to retrieve I/M readiness status of your car before taking it for smog test can help you save time and money.
You will be able to clear pending codes and rectify the faults within the fuel system using the code reader.
ATDIAG AT330 code reader can effectively connect with the onboard computer to retrieve I/M readiness status of your vehicle.
It has one-click smog readiness key that allows you to perform a comprehensive I/M readiness test.
Reading the I/M readiness status using this code reader is incredibly easy.
This is because it has colored LEDs that indicates the emission status of a vehicle.
You can retrieve codes indicating that your car is in good condition.
It means that your car will easily pass the smog test when it is in good condition.
On the other hand, you can retrieve codes indicating pending issues that need to be cleared.
Under such circumstance, you need to clear the pending codes so as to pass the smog test.
On a worst-case scenario, you can retrieve codes indicating that your car is in bad condition.
You will need to perform comprehensive repairs on your car so as to be able to pass the smog test.
Once the repairs are complete ATDIAG AT330 code reader will help you verify that the repairs were effectively done.
The system takes time to make a connection and sometimes fail completely to make connections in vehicles listed to be compatible.
2. Read and clear fault codes
This will help you to reduce the number of trips to your mechanic eventually helping you to save time.
On the other hand, you will cut down on the cost of repairs as you can clear codes without taking your car to a mechanics.
The best part is that ATDIAG AT330 can help you read live data.
It, therefore, means that you will be able to make all your repair decisions on accurate data.
At the same time, the code reader can help you to retrieve freeze frame data.
The combination of freeze frame, as well as live data, can help you perform better diagnosis and repairs.
This code reader does not support live graphing.
Besides, the small screen makes the process of reading and clearing codes cumbersome.
3. Retrieve VIN, CVN, and CIN
If you need to track the records of a vehicle then you need its Vehicle Identification Number(VIN)
But where do you find the VIN of an OBD2/EOBD compliant vehicle?
Well, you can easily retrieve the VIN of any vehicle from the Vehicle onboard computer using a code reader.
Fortunately, ATDIAG AT330 can accurately retrieve VIN from any compatible OBD2/EOBD compliant vehicle.
This is particularly useful when you want to buy a used car.
The information can help you establish the actual condition of the car and the millage.
ATDIAG Car obd2 code reader only works on 12 Volt vehicles.
You will find that it does not work on heavy trucks.
ATDIAG AT330 is compatible with OBD2/EOBD vehicles manufactured after 1996.
The vehicles include U.S domestic manufactured vehicles and foreign models.
You will notice that this code reader supports six languages that include Russian, French, Spanish, English, Dutch, and Deutsch.
- It is really easy to use
- The code reader is really affordable
- Has a one-click readiness test button for ease of diagnosis.
- It has LEDs that allows you to establish the emission status at a glance.
- You will be able to retrieve live data and freeze frame.
- It is multilingual as it supports six languages
- Light and portable allowing you to carry it anywhere you go.
- Has a colored TFT screen
- You will notice that it fails to establish connections in some vehicles listed to be compatible.
- It is really difficult to update or upgrade
- The code reader does not retrieve codes on vehicles that use 24V batteries
- You will not be able to perform any advanced function with this code reader.
- It is really slow and takes several minutes to retrieve codes.
ATDIAG AT330 vs Autel AutoLink AL319 vs BAFX Comparison Chart
ATDIAG Car obd2 Code Reader, AT330 OBDII/EOBD Auto Scanner
Autel AutoLink AL319 OBD2 Scanner
BAFX Products Bluetooth Diagnostic OBDII Reader
4.2 / 5
4.4 / 5
4.4 / 5
|Pros||Read and Clear fault codes;|
Supports I/M readiness test;
Compatible with OBD2/EOBD domestic and foreign vehicles;
Support live data and Freeze frame.
|Same as AT330||Same as AT330|
|Cons||Just a basic code reader.||Does not support ABS, airbag.||Not support iOS devices.|
|Bottom Line||AT330 is for beginners.||Autel Al319 is a good pick for any car owners.||BAFX suits those that prefer Bluetooth.|
Who is it for?
ATDIAG AT330 is fundamentally designed for the average car owners.
If you want to perform basic diagnostic functions affordable then you can check out on this code reader.
You will notice that it is really easy to use.
The Bottom Line
With most vehicles being OBD2/EOBD compliant, you need a code reader that can help you to read and clear codes.
ATDIAG AT330 can help you to save money as well as time as you will be making fewer trips to a mechanic shop.
Besides, this code reader is affordable and really easy to use.
It is a code reader recommended for average car owners who want to perform basic diagnostic functions.