Since I started using many of the android based OBD devices, I have seen changes happen to a number of them. The majority comes in the most simple to use manner, and I have been in love with them.
However, while people with useful information the good times, the OBD 2 landscape is not a smooth one. Several devices come into the market and choosing the correct one is the problem many go through each day.
We are well aware of your agony and have tried to bridge the gap. We have always brought reviews with the best content and advice. Our latest on the PLX Devices Kiwi 3 Bluetooth OBD2 Diagnostic Scan Tool is not an exception.
The Pros of PLX Kiwi 3
The following are areas I have personally come to love with the device;
The convenience and the fast speed of the device to get my code reading were commendable. The fact that the OBD 2 scanner goes across vehicle brands supported by its ability to work on the Android, iOS and windows mobiles.
I liked the low power consumption rate of the device and so enabled the user to operate at lower power levels, which I found to be beneficial to the car engine.
While the majority of the current mobile phone users are Android, the use of the inbuilt Kiwi OBD 2 is easier for the ease of App compatibility and thus supports the several other Apps which other OBD 2 scanners may not help.
The internet is the way to go, and the manufacturer of the device is well aware. I liked the manner in which the wireless connection that enables the tool to work makes it easy to use in most of the areas users want to get the data.
It easily connects to the car engine, gets the data and enables the user to get the fault code data in real-time.
The majority of the current OBD 2 units have the compatibility with the several manufacturers specific, generic and the CAN error codes; this one covers all these error codes as I can opine.
In the majority of the online platforms where I visited before using mine, one notable point that most users find the small design of the device makes it four times faster in comparison to many other devices users have.
Personally, the fact that this device is plug_and_play and does not require Bluetooth pairing makes it a convenient tool to use in any modern car.
The Cons of PLX Kiwi 3
The several upsides that come with the machine have not deterred the notice of some downsides by the users. Some of the few I noted include;
The additional cost of app increases the purchase cost and renders the device obsolete if the buyer does not have the amount.
The scope in which the device goes is in question as it does not do something done by devices of its range.
While I was quick to say that the device is fast, its accuracy is one point I disliked. For instance, when I once connected it to my car, it did not bring forth some of the error codes that then made my scanning cumbersome and costly as I had to visit the mechanic.
It is usually what the buyer takes home based on the knowledge at purchase that determines the experience. Some tools may appear to be of excellent quality yet the opposite is what they have on the ground. PLX Devises Kiwi 3 Bluetooth OBD2 brings to the user all that they promise.
Because it is for Android, Apple, & Windows Mobile phones, those who do not have these groups of operating systems on their mobiles may find it hard to use. Quality is paramount, and we have it here. I can confirm!